CANNY logic forum — Counter/switch

Re: Counter/switch

null@example.com (Konstantin, CANNY logic) — Sat, 05 Feb 2022 18:07:58 +0000

Is it a problem of synchronisation, or problems regarding rising/falling edges of the 'clock'?

Perhaps both.

Please try the attached diagram.
The PWM timings are increased for better visualization in Simulator.
All edited parts are marked.

Re: Counter/switch

null@example.com (nicolas0481) — Fri, 04 Feb 2022 14:20:12 +0000

sorry forget to click 'add'

Re: Counter/switch

null@example.com (Konstantin, CANNY logic) — Fri, 04 Feb 2022 13:46:38 +0000

There is no attachment in your post. Please add.
Also, you can run your diagram in CannyLab Simulator, add some breakpoints and run or step it to see what exactly going on:
https://cannylogic.com/docs/cannylab/simulator/

Counter/switch

null@example.com (nicolas0481) — Fri, 04 Feb 2022 12:56:55 +0000

Hello,

I'm trying to use a counter to switch between different values of a switch block (see attachment). I use kind of feedback to reset the counter as soon he reaches specific value. But it doesn't seem to work. I would like to adjust constant value '2' in the examples to walk trough index 0 and 1 of the switch, or to adjust to 5 to walk trough value 0,1,2,3,4. value from index '0' never come to output.
Is it a problem of synchronisation, or problems regarding rising/falling edges of the 'clock'?

Thanks

Nico