CANNY logic forum — filter canid

Re: filter canid

2025-07-18T17:57:36Z

You built this diagram based on example from figure #5 from the documentation. It won't work for you. You'd better use example from figure #4 as a basis, as I suggested earlier. Or use my diagram, it works, I tested it. Anyway, you will need to read the documentation and understand how it works. Or try asking for a ready-made solution here: https://forum.cannylogic.com/viewforum.php?id=11

Re: filter canid

2025-07-18T14:43:47Z

the diagram you change not works.
i change my diagram like i see in the manual.

It block the id 18EB9A2B, but not change the bits D5 D4.

grz
pascal

Re: filter canid

2025-07-15T16:40:00Z

Make sure you have been careful when reading the documentation ( https://cannylogic.com/docs/c72duo/cangateway/ ) and creating a diagram.
Please ask the following questions of similar meaning in the appropriate forum: https://forum.cannylogic.com/viewforum.php?id=11

Re: filter canid

2025-07-15T16:16:41Z

Konstantin, CANNY logic wrote:

Fendttech wrote:
i have a problem with my diagram...
It looks like you forgot to attach your diagram to your question.
Anyway, please see the example on figure 4 here: https://cannylogic.com/docs/c72duo/cang … processing

Re: filter canid

2025-07-15T14:41:03Z

Fendttech wrote:

i have a problem with my diagram...

It looks like you forgot to attach your diagram to your question.

Anyway, please see the example on figure 4 here: https://cannylogic.com/docs/c72duo/cang … processing

filter canid

2025-07-15T07:27:49Z

i have a problem with my diagram to filter specific canid messages.

I want that the diagram filter the message canid: 18eb9a2b - bytes: 98 EF FF 01 04 28 00 00, and replace 28 00 with 32 00.

The diagram change the value on all can messages with 18eb9a2b.

What is my fault?

grz