1 Topic by EngineerFreely

  • EngineerFreely
  • Новичок
  • Offline
  • Registered: 29-01-2023
  • Posts: 1

Topic: Looking for help on my first 2 proejcts

Hi, just got my Canny 7.2 and started to work with it.  I am looking for help on these 2 projects:

1) Automatic shifter into can messages to transfer to an aftermarket ECU

I have a shifter that will be able to send 7 discretes to the CANNY.  I want to be able to output can messages on a 500kbps bus to my ECU.  Can messages output can be anything.   

2) Aftermarket ECU sends a CAN BUS message to the canny to trigger a relay.  I need to control a parking actuator and reverse lights on 2 separate relays. 

Are there any examples that can point me in the right direction? 

Thanks

2 Reply by Konstantin, CANNY logic

  • Konstantin, CANNY logic
  • Konstantin, CANNY logic
  • Administrator
  • Offline
  • Registered: 19-02-2013
  • Posts: 202

Re: Looking for help on my first 2 proejcts

You can find some relevant examples at the bottom of this page: https://cannylogic.com/docs/c72duo/can/

You can get a link to the example source file by clicking on the image.

Konstantin, CANNY logic's Website