1 Topic by Abdo28 (edited by Abdo28 22-01-2024 22:33:57)

  • Abdo28
  • Новичок
  • Offline
  • Registered: 16-03-2023
  • Posts: 9

Topic: rs232 to can

hi is it possible to use UART/rs232 pin to revive data and convert it to canbus

2 Reply by Konstantin, CANNY logic

  • Konstantin, CANNY logic
  • Konstantin, CANNY logic
  • Administrator
  • Offline
  • Registered: 19-02-2013
  • Posts: 174

Re: rs232 to can

This is possible, but with some restrictions.
Please see here:
https://cannylogic.com/docs/c72duo/can/
and here:
https://cannylogic.com/docs/c72duo/uart/

Konstantin, CANNY logic's Website

3 Reply by Abdo28

  • Abdo28
  • Новичок
  • Offline
  • Registered: 16-03-2023
  • Posts: 9

Re: rs232 to can

can you build  a sample digram  to start with cause i am not very familer with uart /rs232

4 Reply by Abdo28

  • Abdo28
  • Новичок
  • Offline
  • Registered: 16-03-2023
  • Posts: 9

Re: rs232 to can

any help

5 Reply by Konstantin, CANNY logic

  • Konstantin, CANNY logic
  • Konstantin, CANNY logic
  • Administrator
  • Offline
  • Registered: 19-02-2013
  • Posts: 174

Re: rs232 to can

You can find examples in the articles at the link I sent you above.
Please start to build your solution based on this examples. Then attach your cfd-diagram file and ask me your question if you get stuck anywhere.

Konstantin, CANNY logic's Website