You are not logged in. Please login or register.
CANNY logic forum → CANNY 5.2 / 7.2 duo → filter canid
i have a problem with my diagram to filter specific canid messages.
I want that the diagram filter the message canid: 18eb9a2b - bytes: 98 EF FF 01 04 28 00 00, and replace 28 00 with 32 00.
The diagram change the value on all can messages with 18eb9a2b.
What is my fault?
grz
i have a problem with my diagram...
It looks like you forgot to attach your diagram to your question.
Anyway, please see the example on figure 4 here: https://cannylogic.com/docs/c72duo/cang … processing
Fendttech wrote:i have a problem with my diagram...
It looks like you forgot to attach your diagram to your question.
Anyway, please see the example on figure 4 here: https://cannylogic.com/docs/c72duo/cang … processing
replace d5 d4.cfd 2.5 kb, 38 downloads since 2025-07-15
Make sure you have been careful when reading the documentation ( https://cannylogic.com/docs/c72duo/cangateway/ ) and creating a diagram.
Please ask the following questions of similar meaning in the appropriate forum: https://forum.cannylogic.com/viewforum.php?id=11
d5d6.png 45.62 kb, 32 downloads since 2025-07-15
replace d5 d6.cfd 2.46 kb, 44 downloads since 2025-07-15
the diagram you change not works.
i change my diagram like i see in the manual.
It block the id 18EB9A2B, but not change the bits D5 D4.
grz
pascal
test replace d5 d4.cfd 5.75 kb, 36 downloads since 2025-07-18
You built this diagram based on example from figure #5 from the documentation. It won't work for you. You'd better use example from figure #4 as a basis, as I suggested earlier. Or use my diagram, it works, I tested it. Anyway, you will need to read the documentation and understand how it works. Or try asking for a ready-made solution here: https://forum.cannylogic.com/viewforum.php?id=11
CANNY logic forum → CANNY 5.2 / 7.2 duo → filter canid