You are not logged in. Please login or register.
CANNY logic forum → CANNY 7 → Sending a 11bits ID message via can bus
Hi, thank you very much for your support.
Untill now i used the Canny 7 only for monitoring and observing the can bus activity. now i want to send one 11bits ID message with 8 bytes datas, but this message must be sent every 78ms during a windows of 3 seconds. please could you show me the easier way to do that.
thank you.
You can find description with examples of sending 11 and 29 bits CAN ID with data here: http://wiki.cannylogic.com/index.php?ti … CAN_Driver
Please read this article carefully, take a must useful for you example and try to implement it with your data.
Then if you get stuck, please ask your question with attached cfd-file.
Thank you very much for your fast reply! i will follow your examples and let you know!
hi, i want to know if you have a windows software version for monitoring ?
Canny CAN/LIN Monitor is Windows console application. We planed to release Windows GUI application soon.
CANNY logic forum → CANNY 7 → Sending a 11bits ID message via can bus